DETAILS
Drive gear with pin-bolt shaped locking points compatible with LS400 lift and slide system.
• 37.5 millimetre spindle and maximum height of 1800 millimetres.
• The distance between the fixing centres of the drive gear is 80 mm.
• The drive gear allows to position the height of the handle at 440 mm from the floor level.
• Integrated regulation system allowing adjustment of -3, 5 millimetres
• Supplied with pre-installation for European cylinder.
• The basic configuration consists of 3 locking points.
• Compatible with the locking point extender (A234011) for configurations with leaf height greater than 2800 millimetres.
Regulation
The reference supports adjustment