DETAILS
Drive gear with pin-bolt shaped locking points compatible with LS400 lift & slide system.
• 37.5 millimetre backset and maximum height of 1800 millimetres.
• The distance between the fixing centres is 80 millimetres.
• The drive gear allows to position the height of the pull handle at 440 mm from the ground.
• Integrated regulation system allowing adjustment of -3, 5 millimetres
• Supplied with pre-installation for european cylinder.
• The basic configuration consists of 3 locking points.
• Compatible with the extension rod with locking point (A234011) for configurations with sash height greater than 2800 millimetres.
Regulation
The reference supports adjustment
